Deciding On A Boat To Build

I finally narrowed down my boat search.I have been tormenting myself with buying or building.After doing the math,I have come to the conclusion that I can build a new boat cheaper and better than buying a used turn key boat.Most of the turn key boats I looked at really needed work.Fiberglass boats are the worst.Most have water logged flotation foam that causes the wood stringers and transom to rot from the bottom up.Ive stripped (and helped strip) and rebuilt a few boats.It is not fun in a big 25+ foot boat.Its faster and easier to start from scratch.

 Most of my boating will be on larger lakes and the ICW around South Carolina,North Carolina,and Georgia.I do plan to take the boat around the Great Loop,so it must be a sea worthy design.I searched for years for a design that was easy for a first time builder with some basic carpentry and boat building skills.There are a lot of excellent boat designers with plans out.Most are more suited to the advanced DIY builder than a first timer with basic skills.Out of all the producers of plans,I decided on Spira International.Jeff Spira is the designer of all the plans.The best thing about his plans,is access to Jeff Spira himself.He can be contacted through his website or on facebook.He always gets back in contact with you within time.He is a busy man tho.So please give him a few days,he could be away.

 My base criteria for a boat is as follows in this order.There are more variables,but these are the main ones.
1)Trailerable behind a full size pick up truck,van,or class C RV.
2)Shallow draft, 12 to 16 inches with the lower unit up.
3)Absolutely no more than 2 gallon per hour fuel burn at displacement speed.
4)Must have sleeping arrangements for four.
5)Must have full head with shower.

In my next post, "The Chosen One",I will review the Spira plans that I considered,a break down of build cost,and the plans I chose.

Honey,Lets get a boat.

Related Posts by Categories

0 comments:

Post a Comment




Blog Archive

Powered by Blogger.